[KARAOKE] [DJ GEAR] [GUITARS] [LIGHTING] [LIGHT BULBS] [NEW GEAR] [USED GEAR] [RENTALS] [BLOWOUTS!]

[ Home ] [ Feedback ] [ Contents ] [ Search ] [Browse by Brand]  

Crate V30H Amplifier

Crate V30H Amplifier at the lowest prices!  Power Alley is an authorized dealer for Crate V30H Amplifier!  Free shipping on Crate V30H Amplifier.  Call 800-788-9552 for the best deal on Crate V30H Amplifier!

5 YEAR Transferable warranty!

The NEW V30H is "Class A" tube head featuring an internal spring reverb. This amplifier packs a whole lot of vintage tube sound into its compact cabinet - giving you an amp that's portable and easy to operate yet still produces incredible sounds! Hidden underneath the amp's cabinet are a pair of heavy duty slide-out mounting brackets which can be used to "piggyback" the amplifier onto the top of the Crate V212T Guitar Speaker Enclosure. Get tone-full and hard-driving with the Crate V-Series.

V30H

1. Input: Connect your instrument here by means of a shielded signal cable.
2. Clean Volume: Use this control to adjust the output level of the Clean Channel.
3. Clean/Overdrive: This switch, when depressed, selects the Overdrive Channel. When this switch is in the out position, the Clean Channel is selected.
4. Overdrive Gain: Use this control to adjust the gain of the Overdrive Channel. With the control towards the counter clockwise position, the gain is low and very little distortion is present. As you rotate the control clockwise the gain increases, producing more overdrive distortion and a higher output volume level.
5. Treble: Use this control to adjust the output level of the high frequencies. This control provides 12dB of cut or boost at 6kHz.
6. Boost: This switch, when depressed, increases the output by 10dB at 900Hz, giving the middle frequencies more punch.
7. Mid: Use this control to adjust the output level of the middle frequencies. This control provides 10dB of cut or boost at 1kHz.
8. Bass: Use this control to adjust the output level of the low frequencies. This control provides 8dB of cut or boost at 150Hz.		 9. Presence: This switch, when depressed, increases the output level of the high frequencies by 8dB at 10kHz, giving a more “glassy” sound to the amplifier. This helps the output of the amplifier cut through “acoustically dead” rooms.
10. Overdrive Level: Use this control to adjust the output level of the Overdrive Channel.
11. Reverb: Use this control to adjust the amount of reverberation applied to the signal. With the control fully counter clockwise no reverb is applied. As you rotate the control clockwise the amount of reverb increases.
12. Lamp: This lamp illuminates when the amplifier is turned on.
13. On/Standby: Use this switch to activate the amplifier. The On/Off switch (#14) should be turned on first. Allow 20 seconds for the amplifier to warm up before turning the Standby switch on.
14. On/Off: Use this switch to turn the amplifier on and off. This switch should be turned on at least 20 seconds before turning the Standby switch (#13) on.